How to make TNT in Minecraft. Where to get tnt in minecraft

The destruction radius of any TNT in Minecraft is approximately 3-5 blocks. That was all you need to know about creating and using TNT in Minecraft. We hope we managed to dispel all your doubts and in return you will be able to successfully create TNT in the game. You can find more Minecraft articles like this on our site!

TNT Spawn Command

The TNT item can be respawned in Minecraft with the command below. The cheats must be enabled before this can work.

If you are using the Essentials plugin, you must run / minecraft: give instead of just / give. This is because the Essentials / Give command replaces the built-in Minecraft command.

TNT Block States

Block states are values ​​assigned to a block that change its state. For example, multiple blocks have a “direction” block state which can be used to change the direction in which the block is facing.

Find below a table of all block states for a TNT block.

All Minecraft 1.18 Item IDs

Find thousands of other items in our complete list of 1,325 Minecraft IDs.

TNT is an extremely helpful item in Minecraft. Thanks to it, you can, for example, blow up large areas of land and carry out mining activities. In this article, we’ll show you how.

Ingredients for TNT in Minecraft

As mentioned earlier, you will need the following three items to craft TNT in Minecraft.

  • Sand – They are one of the most common items in Minecraft. Sand blocks can be recognized by their pale yellow appearance. To collect several blocks of sand, visit any water reservoirs nearby.
  • Gunpowder – The second ingredient to make TNT is Gunpowder. Unlike sand blocks, gunpowder is a little harder to find. The best way to get gunpowder is to kill the Creepers, Ghast or Witch monsters that are circling near your base. They will drop 0 to 2 blocks of gunpowder. But if you’re still confused, here’s a step-by-step guide on finding gunpowder in Minecraft.

Crafting a TNT in Minecraft

After obtaining the required materials, create a TNT from a crafting table 3×3 using the following formation.

Screenshot by Pro Game Guides

You will need exactly five blocks of gunpowder and four blocks of sand to make one block of TNT.

If you don’t have a 3×3 crafting table, create one using any four wooden planks.

Screenshot by Pro Game Guides

TNT can also be obtained under the underground trap of the desert pyramid if the player does not trigger an explosion or in a secret room of the forest mansion. To perform TNT, please refer to the instructions below.

How To Make & Use TNT In Minecraft

Author: Titus D’souza August 4, 2021

how to make minecraft tnt

TNT is an extremely helpful item in Minecraft. Thanks to it, you can, for example, blow up large areas of land and carry out mining activities. In this article, we’ll show you how.

How to Craft & Use TNT in Minecraft?

To learn how to make TNT in Minecraft, check out the steps below:

Materials Required

Before we start creating TNT in Minecraft, let’s check out the materials needed for that.

Of all these materials, sand is the easiest to find. Sand can be found in regions close to bodies of water, such as rivers or the seas. The sand can only be picked up by hand, not with special tools.

To get gunpowder, you have to kill the vines. This is the easiest way to get gunpowder. Be sure to kill the creepers before they explode. This will help you get gunpowder.

Making TNT in Minecraft

Now that we have the materials we need, we can start producing TNT.

  • To get started, first open a crafting table.
  • Once done, place your materials in the exact formation as shown in the image below.

minecraft tnt

  • On the top row of the crafting table, place the gunpowder in the first and third available slots. Put one sand in the center hole.
  • In the middle row, put sand in the first and third free slots. Place gunpowder in the middle slot.
  • For the last row, repeat the same pattern as for the first row.

How to Use TNT in Minecraft?

  • Now that you’ve made TNT, let’s see how you can use them.
  • You need a live redstone signal to activate TNT.
  • Alternatively, it can also be illuminated with flint and steel.

This brings us to the end of this article on how to create and use TNT in Minecraft. As you can see, this is a fairly simple process that can be done very quickly.

GamerTweak is the place for hardcore gamers like you to find everything they need to know about video games – new and old. GT’s goal is to be the best source for easy-to-understand tips and tricks, reviews, original features, hidden cheats and game improvements to help players around the world. Check out the upcoming games as well as receive detailed information on these evergreen ones. We eat, sleep, breathe while playing, and we will keep you updated on news right here!

Sand: Sand is a block in Minecraft that is usually found near bodies of water such as beaches and rivers. Sand can be easily picked up with a shovel. You can also use red sand as an alternative to creating TNT, but can only be obtained in the Badlands biome.

How to Set off TNT

TNT can be fired in many different ways, and when fired, it will expand like a climber and explode within four seconds. If the ignited TNT is on any high surface, it will hit the ground like powdered concrete or sand.

TNT can be fired if it comes into contact with fire, lava, flint and steel, fire arrow, or other fire-related objects that explode. TNT can also explode if it is struck by lightning or near another exploding TNT, opening a trapped chest, and you can also use Redstone to trigger it as well.

First, you need to activate TNT to start using it in the game. You can use the redstone signal or ignite it with flint and steel to turn it on. Once enabled, you can use TNT to blow up any area and cause havoc.

Materials Required To Craft TNT

Sand: Sand is a block in Minecraft that is usually found near bodies of water such as beaches and rivers. Sand can be easily picked up with a shovel. You can also use red sand as an alternative to creating TNT, but can only be obtained in the Badlands biome.

Gunpowder: Gunpowder is an item that is frequently used in Minecraft explosion laws. Can be obtained by killing mobs such as vines, ghosts, and witches.

More Minecraft Guides:

How To Obtain TNT in Minecraft

There are two ways to get TNT in Minecraft and it can be crafting or looting. By collecting TNT from loot, you can collect it in chests or by destroying carriages with TNT. Chests containing TNT as loot are as follows:

TNT can also be obtained under the underground trap of the desert pyramid if the player does not trigger an explosion or in a secret room of the forest mansion. To perform TNT, please refer to the instructions below.

TNT is an extremely helpful item in Minecraft. Thanks to it, you can, for example, blow up large areas of land and carry out mining activities. In this article, we’ll show you how.

How To Use TNT In Minecraft?

First, you need to activate TNT to start using it in the game. You can use the redstone signal or ignite it with flint and steel to turn it on. Once enabled, you can use TNT to blow up any area and cause havoc.

The destruction radius of any TNT in Minecraft is approximately 3-5 blocks.
That was all you need to know about creating and using TNT in Minecraft. We hope we managed to dispel all your doubts and in return you will be able to successfully create TNT in the game. You can find more Minecraft articles like this on our site!

TNT can be fired in many different ways, and when fired, it will expand like a climber and explode within four seconds. If the ignited TNT is on any high surface, it will hit the ground like powdered concrete or sand.

Supported Platforms

Supported platforms for creating TNT

Requirements Material Make TNT

There is a basic material you need to prepare first before creating TNT in Minecraft. The required materials are:

How to Make TNT in Minecraft with Survival Mode

When you play Minecraft, TNT can be considered one of the many bricks any player can make.

The tutorials we explain below are a simple and easy way to create TNT in Minecraft using Survival Mode. If you need help creating TNT in Minecraft, try these tips and take each step directly.

1. Open the Crafting Menu

TNT in Minecraft

After entering Minecraft, you now need to open the crafting menu as the first step before proceeding to the next step. There you will find a 3 × 3 crafting mesh which is very useful for the next step and the whole process.

2. Add Items to make TNT

After entering the crafting menu, you must now look around for a crafting area. This area consists of a 3 × 3 craft mesh. To make TNT you need to put 5 pieces of gunpowder and 4 sands on a 3 × 3 crafting mesh.

Keep in mind that it is important to put both gunpowder and sand on an exact pattern.

How to make TNT in Minecraft

For the first row, put 1 gunpowder in the first box, 1 piece of sand in the second box, and put 1 gunpowder in the third box.

Continue placing sand in the first box, 1 gunpowder in the second box, and sand in the third box. Make sure all steps are completed on the second row.

Especially in the third row, place 1 gunpowder in the first box, sand in the second box, and 1 gunpowder in the third box.

After following all these steps and filling the crafting area with the correct pattern, now the TNT item you need will immediately appear in the box on the right.

3. Move the TNT to Inventory

Make TNT in Minecraft

After getting TNT by following all the above instructions you now get the item you want. Complete the process by taking the last important step.

Now you need to move this new item to your inventory to keep it safe. Moreover, this item may be required to make other items that are the basic materials derived from it.

In any case, the various items available in Minecraft can sometimes give you a chance to have fun. One of the fun items is TNT, which is a block that can explode shortly after being set on fire.

If you have no idea how to make TNT, just try following the instructions on making TNT in Minecraft we explained above.

Rate article