Is It Bad to Have Your Desktop PC on the Floor. How to raise pc off floor

• EXTREMELY STABLE AND SECURE – Your new monitor bracket withstands up to 44 pounds, it comes with anti-slip feet and anti-slip rubber to increase stability and protect your laptop and furniture from damage. You can rest assured that your device will be in good hands as you get more work done

5 Best Computer Tower Stands [2022 Buyer’s Guide]

Should the computer be placed on the table or on the floor? The current trend is to lift the computer from the carpet to the surface, however this is not always possible and many people leave their computer tower on the ground, usually on the carpet. This is not the most effective option for a number of reasons, and you must have a computer tower on a computer stand.

Putting a computer on a desk is becoming common for a number of reasons, most notably because of the extra and extra builds that display ALL RGB elements, however there are alternative causes such as dirt, dust, and hair. With giant front intake fans and power, it has provided a transition to the bottom of the case over the past decade. Some towers have an inlet on the ground panel, which can be difficult when sitting on a carpet.

There is also a risk of static discharge (static electricity) if you extend your tower to work on it, which can damage computer components if not properly grounded. This is not a big problem if the tower is set on hardwood or other non-textile surface, however it will quickly turn a routine maintenance session into a nasty time.

Mobile stand for the Kantek processor

Kantek Mobile CPU Stand

VIVO ATX desktop case

VIVO Computer Tower Desktop ATX-Case

Stand for the HUANUO mobile processor

HUANUO Mobile CPU Stand

Floor stand for the SYBA Mobile Desktop computer

SYBA Mobile Desktop Tower Computer Floor Stand

HUANUO monitor stand

HUANUO Monitor/Computer Stand Riser

Kantek Mobile CPU Stand with Adjustable Width and Locking Casters, 16-Inch Wide x 7-Inch Deep x 4.8-Inch High (CS200B),Black

Mobile stand for the Kantek processor

Mobile stand for the Kantek processor

A great and stylish Kantek idea with a mainframe desktop stand that can add some charm to your Tower PC. Taken together, this means that the cradle is flexible, designed to be used in a wide variety of things. The use of this stand is very simple. After unpacking, you’ll find that it’s quite compact. Simply grab both sides of the stand and slide it apart by folding out separate supports.

It is made of industrial grade recycled material which can allow you to remain solid and durable for many years modifying the space to fit from 3.5cm to 9.75cm.

The solid part weighs up to 60 pounds, much more than a normal computer needs. The quality of the four heavy-duty wheels has proved to be effective. This device is often installed in seconds and no tool surface unit is required. This booth can have options that will charm every business and customer market: it is cheap, lasts longer, and is still quite trendy.

For quick and compact transport, the base of the main frame folds down. It works according to rumors and also the value you have to pay is sweet.


• Product dimensions LxWxH 16.5 x 2.5 x 8.5 inches

• Material acrylonitrile butadiene styrene, plastic

• Product weight 1 kilograms


• Slim, slim base lifts the processor for easier access; protects the processor above the floor; increases air flow

• Adjustable width fits a wide range of processors; adjusts the width from 3.5 ”to 9.75

• Strong and durable; supports up to 60 pounds; 4 lockable casters for stability and easy mobility

• Easy to assemble, no tools required, elements simply lock into place and folds away for storage

• Ideal for UPS (uninterruptible power supply)

Why did we like it?

• Elegant, slim casings improve the usability of the processor. Leaves the processor safe above the floor.

• Easy to hold and lightweight.

  • Elegant, slim cabins
  • It is easy to hold and lightweight.

• Low Profile – The matte black finish gives this product a simple yet attractive appearance, allowing it to blend in well with most environments. Keep your computer clear of the floor and this cart will keep it clean and well ventilated.

Carpet Can Block Airflow

Modern PC cases are usually not completely flat on the bottom. They have feet so that their base is a little off the floor. There is air flow under the housing. All PC cases have fans that expel hot air and vents that allow cool air to enter; in some cases there are even additional intake fans to further facilitate the intake of cool air.

In any case, that’s how it should work. If you put the case on a thick plush rug, the rug may block some of that airflow. It’s very bad for air to flow to or from the computer through the bottom of the case. This is bad even if air doesn’t flow in or out of the case here – if your PC collapses into the carpet a bit, heat can build up underneath due to the lack of airflow.

Of course, if you have a short rug on the floor, your computer may be able to sit on that rug with a lot of airflow underneath. And if you don’t have any rug at all, that’s not a problem. Your computer will feel right at home sitting on a flat floor, just like sitting on a flat desk.

Before you place your computer on the floor, think about air flow. Avoid placing the tower computer on a thick carpet. If the rug is a problem, consider placing it on a landing or placing it on top of the rug. For this purpose, you can buy stands on wheels, which will also make it easier to carry the desk. Hell, even putting a piece of wood on the floor and placing the computer on a wooden platform will fix this problem, although it might not be pretty.

Your PC Will Suck in More Dust on the Floor

Dusty computer case fan

Kritsapong jeantaratip / Shutterstock

There is almost certainly more dust, hair and other debris on your floor than on your desk or table. It matters – your computer’s fans suck in and blow out air. These fans can suck dust, dirt, and other garbage into your computer.

This happens no matter where you put your computer. Even if you have a computer on your desk, you’ll want to vacuum it with compressed air from time to time. But your computer will likely suck in more dust and debris when it’s lying on the floor. Dust gets in the way of your computer’s cooling and will make it hotter if you need to clean it.

it’s also easier to vacuum and clean around the computer sitting on the desk. If it’s in the corner, how often are you going to move the computer case around, vacuum and vacuum the cables back there? It is easy to postpone cleaning and accumulate dust where the computer is located.

If you’re keeping your tower computer on the floor, be sure to vacuum regularly – probably more than necessary if you’re keeping it on your desk. It depends on how dusty the floor is, but it’s worth checking every few months. Also, be sure to clean around and behind the case to avoid dust build-up.

In some situations, the floor may be even better. Chances are good you have more floor space than your desk and placing your tower on the floor will free up some space. Some people with heavy PC towers may fear that they will tip over from their desks and fall on children or pets.

PC Tower stand vs table

There is really no one answer to all of this, it depends on your personal preferences. If you don’t have desk space, a stand may be more advantageous. It can also help you organize your countertop better and again won’t cause any ventilation problems.

That being said, if you have room on a table or computer desk and there is no airflow restriction by placing the tower on the desk, the base may be small.

What to look for in a computer tower stand

great – hopefully you’ve decided if you really need a table stand, but what should you be looking for in the table stand you bought? Here are some things you should consider:

This will support the expensive computer you have, you need to make sure it is durable enough and of high quality to do so and to stand the test of time. The towers can be quite heavy, so you need to make sure you check what weight the stand can support, you want to be sure it is significantly higher than the weight of the computer tower.

It’s really a personal preference, but design can get into it. Some designs are small and neat but usually don’t provide that much support, so if you want to pick something that’s a little safer you’ll want it to wrap around the sides but don’t look as good.

What do you expect from the PC Tower stand? There are a few that are static and non-moving, but you also have the option of having a wheel stand for extra flexibility and the ability to easily move the tower around.

Tower size
This is something you should consider – the size of your computer’s tower. Some of the larger towers may not fit into the smaller computer stands, so make sure you check what size they can accommodate. If you’re unsure, we’ll check a few options that offer flexible widths.

You know that big, bulky computer tower you just bought? Or maybe he’s been there for a long time. It’s not the easiest thing to maneuver, and it can get quite annoying when you wonder where you should put them.

Allsop Metal Art CPU Caddy

Allsop Metal Art processor case

This one is a bit taller, but more stylized. I don’t know if I would load it with a heavier turret due to its adjustable design, but for a lighter turret, this pc case may be a good choice if it suits your decor.

Econo Mobile CPU Stand

Econo mobile processor stand

A computer stand that looks straight out of Office Space. This is possibly the most pedestrian booth of all, but it can also blend in with the best of your office setup. Again, you will need to verify the tower placement for PSU consumption.

If possible, use your laptop on a flat surface (where the rubber feet usually lift it off the desk), or at least make sure your lap is free of blankets and other things that can block the airflow. Knee desks are a good way to ensure everything stays cool.

Which Computer Tower Stand is Right for Me?

With these three models, we have seen several different approaches to solving a common problem. Which one you choose depends on how you intend to use the tower and what reliability you expect from it.

In the consumer market, our best choice will be the Monoprice Multi Media desk stand. This is by far the most attractive of the group. If you’ve chosen a stylish PC case, the metal and glass design will really add to the visually appealing environment you’ve created. With that in mind, Monoprice has taken many steps to ensure that these stylish materials are also quite durable, so you don’t have to worry about any damage with your new purchase.

Are you planning to move your computer? In that case, we recommend upgrading to a rack with built-in wheels. The first one you should look at is the Kantek CS200B mobile stand. This is one of the most conservative-looking stands. Almost all the hardware is hidden under the turret, so all you really see are the brackets and the four little wheels sticking out of the bottom. This stand has four wheels so you can move it when needed or lock it in place when you need to. But Kantek is perfect for more compact cases, standard ATX or lower.

If you have a full tower case or a lot of heavy hardware inside, a 3M Adjustable CPU Stand is a better option. It is much more durable and the metal support bars are taller, so you can comfortably support a taller tower. If durability and reliability are your key attributes then 3M is the way to go.

Of course, if you have a short rug on the floor, your computer may be able to sit on that rug with a lot of airflow underneath. And if you don’t have any rug at all, that’s not a problem. Your computer will feel right at home sitting on a flat floor, just like sitting on a flat desk.

Server Room Access Flooring Capable of Supporting All Your Equipment

While Bolted Stringers are the most practical lowers for server rooms, you do have options for tiles. For most server room / computer floor applications, we recommend installing the systems using either galvanized steel panels or tiles made of a combination of steel and cement:

There are other options for expanding the rest of the facility. All our computer flooring planks are flame spread rated and many are interchangeable for added design versatility. Browse through all of our raised floor systems for a complete list of options.

The Advantages of Easy-Access Computer Flooring

Whatever your technology needs are, a raised computer room floor can help lower costs and improve usability. These systems are critical where the ability to quickly add new racks and servers or modify existing environments is essential for a continued return on investment. Some of the most common deployment scenarios include large-scale server rooms – where temperature control is critical to overall performance – and mission-critical datacenter operations.

The elevated server room floor offers many key advantages over traditional flooring options:

Whichever model you choose, the height is always adjustable. The four legs have a threaded base. Loosening them increases the height, tightening them decreases. This is fantastic if you plan to store something under the rack or if you have a smaller box that you want to lift off the table a bit more.

Stressing the Cables and Ports

While damage to a USB port or cable is not as dangerous as mishandling the adapter, it can still cause avoidable computer damage. It may seem obvious, but don’t force the cables into the ports if they don’t slide properly (I used to know someone who stuffed a USB cable into a FireWire port and broke both).

Likewise, if you leave something plugged in, be careful not to bend it. If you have a flash drive in your laptop’s USB port, using the laptop cross legged can bend the flash drive, damaging the drive, the port, or both. And with such high-quality USB ports on today’s laptops, you definitely don’t want to ruin one of them.

The same goes for your cables. If you constantly make sharp bends back and forth, you are more likely to break the connection inside which can make the cable picky or useless. Keep them away from hungry babies and pets that can chew on plastic, and when you roll them up avoid wrapping them too tightly. Fortunately, replacing a damaged cable is cheap compared to your computer, but why waste your money if you don’t have to?

Browsing the Web Unprotected

Contrary to popular belief, “common sense”, while very valuable, should not be your only protection against malware. Even legitimate websites can become infected with malware, transferring these problems to you, so browsing carefully won’t always save you. Instead, you have to use an antivirus program on your computer.

Luckily, Microsoft’s built-in Windows Defender feature has gotten pretty good after a few years of lower ratings. Just leave it on and let it do its job. If you need extra protection, Malwarebytes Anti-Malware is a bit more aggressive with its protection, and I’ve found it catches a lot of things that Chrome and Windows Defender are missing.

The free version is good if you only want to scan occasionally, but the paid version has always working anti-exploit features that block potentially harmful websites before they hit your screen. When paired with a traditional antivirus like Windows Defender, you’ll be pretty well equipped to protect yourself.

Additionally, other basic security practices still apply: keep your software (both Windows and the programs you use) up-to-date, use a good password manager (instead of the same password on every site), and learn how to spot phishing scams. No pirated software (which often contains malware) and secure your home Wi-Fi network with a WPA2 password.

It may seem trivial, but a bad piece of malware or ransomware can make you suffer, so check out our online safety guide for more tips.

Like What You’re Reading?

Subscribe to the Tips & Tricks newsletter for expert advice on getting the most out of your technology.

This newsletter may contain advertisements, offers, or affiliate links. By subscribing to the newsletter, you agree to our Terms of Use and Privacy Policy. You can unsubscribe from the newsletters at any time.

Rate article